Programming Instructions for Richmat HJH129 BLE Smart Bed Remote Control Unit

Modern adjustable beds have transformed comfort and health by allowing customizable positions and functions tailored to individual needs. Central to this innovation is the remote control that empowers users to effortlessly adjust their bed. The Richmat HJH129 BLE Smart Bed Remote Control Unit stands out for its wireless Bluetooth Low Energy (BLE) connectivity, intuitive interface, and comprehensive programmability.

This guide provides a complete walkthrough of programming and setup instructions for the Richmat HJH129 BLE remote, ensuring users can unlock its full functionality for an enhanced resting experience. Richmat HJH129 BLE Programming

Introduction to the Richmat HJH129 BLE Remote

The HJH129 BLE remote communicates wirelessly with the bed’s motorized control box using Bluetooth Low Energy, offering a secure and responsive connection without tangled wires. It controls multiple motorized bed segments such as head, foot, lumbar, and tilt, and supports memory presets and massage functions.

The remote’s ergonomic design includes clearly marked buttons and an LED backlight for easy nighttime use, while its programmable features allow users to customize positions and massage modes.

Step 1: Preparing for Setup

Before programming your remote, ensure:

The bed’s control box is powered on.
Batteries in the remote are fresh and properly installed.
You have access to the bed’s motor control box (usually under the frame).
The remote is not currently paired with another control box (clear pairing if necessary).

Step 2: Clearing Existing Pairings

If your remote was previously paired with a different bed, clear existing Bluetooth pairings to avoid conflicts:

Hold down the Head Up and Foot Down buttons simultaneously for 5 seconds.
The remote’s flashlight will turn on briefly, indicating all previous pairings have been erased.

Step 3: Pairing the Remote with the Bed Control Box

Locate the pairing button on the control box under the bed. Press and hold it for about 3-5 seconds until you hear a beep or see an LED indicator flash.
Within 60 seconds of entering pairing mode, press and hold the Head Down and Foot Up buttons on the remote simultaneously.
The remote will emit a buzzer sound and the flashlight will blink, confirming successful pairing.
Test control buttons to ensure the remote adjusts the bed properly.

Step 4: Manual Bed Adjustment Controls

Once paired, familiarize yourself with the basic manual controls:

Head Up/Down: Adjust the head section.
Foot Up/Down: Adjust the foot section.
Lumbar Up/Down: Control lumbar support.
Tilt Up/Down: Adjust bed tilt.
Flat Button: Instantly return all sections to a flat position.

Press and hold buttons to make gradual adjustments; release to stop.

Step 5: Programming Memory Positions

The HJH129 BLE remote can save up to three customized bed positions, allowing quick recall of your favorite comfort setups.

Saving a Memory Position

Use manual controls to set the bed to your desired position.
Press and hold the Memory Set button (usually labeled M1, M2, or M3) for about 5 seconds.
The remote’s backlight will blink, confirming the position is stored.

Recalling a Memory Position

Press the corresponding Memory Recall button (M1, M2, or M3) to return the bed to the saved position.

Step 6: Programming Massage Functions

The Richmat HJH129 BLE supports separate massage controls for the head and foot sections with multiple intensity levels and modes.

Activating Massage

Press and hold the Head Massage or Foot Massage button to start the massage function.
Repeated presses cycle through intensity levels: low, medium, high.
Press the Massage Mode button to toggle between modes such as Pulse, Wave, or Constant.
Use the Timer button to set massage duration (10, 20, or 30 minutes).

Massage automatically stops after the set time.

Step 7: Locking and Unlocking the Remote

To prevent accidental operation, the remote can be locked:

Lock: Hold the Lock button for 5 seconds. The LED backlight flashes to indicate locking.
Unlock: Hold the Lock button again for 5 seconds to unlock.

When locked, all buttons except the flashlight are disabled.

Step 8: Resetting the Remote to Factory Settings

If you experience persistent issues, resetting the remote might help:

Hold down the Head Up and Foot Down buttons simultaneously for 10 seconds.
The flashlight will flash and a buzzer will sound, indicating the remote has been reset.
You must re-pair the remote after resetting.

Troubleshooting Tips

Remote Not Pairing: Ensure control box is in pairing mode; try clearing pairings and repeat.
No Response from Motors: Check bed power source and connections.
Massage Not Working: Confirm motors are connected; try resetting remote.
Buttons Unresponsive: Replace batteries and check for physical damage.

Best Practices for Usage and Maintenance

Use fresh batteries and replace them promptly to avoid interruption.
Avoid rapid button pressing to prolong motor life.
Keep the remote in a dry, cool place to prevent damage.
Consult the user manual for updates and firmware upgrades if applicable.

Conclusion

The Richmat HJH129 BLE Smart Bed Remote Control Unit offers versatile and convenient control for adjustable beds, combining Bluetooth connectivity with easy programmability. By following these programming instructions, you can customize your bed’s positions, massage functions, and safety features to suit your unique comfort needs. This empowers users to enjoy restorative sleep and relaxation with just the push of a button.

For detailed diagrams, advanced troubleshooting, and the latest firmware updates, refer to the official Richmat manual or contact customer support.

Blog